How to calculate CBM
CBM (cubic metres, m³) is the volume your cargo takes up. Measure each package at its longest points, including the pallet and any overhang, then use:
CBM = length (m) × width (m) × height (m) × quantity
CBM = length (cm) × width (cm) × height (cm) × quantity ÷ 1,000,000
For example, 120 cartons of 50 × 40 × 30 cm are 0.5 × 0.4 × 0.3 × 120 = 7.2 m³. One cubic metre is about 35.3 cubic feet.
Chargeable weight: air, courier and sea
- Air freight: the greater of gross weight and volume weight, where volume weight = cm³ ÷ 6,000 (1 m³ = 167 kg).
- Courier and express: usually cm³ ÷ 5,000 (1 m³ = 200 kg); some services use other divisors.
- Sea LCL: charged per revenue ton (W/M), the greater of cubic metres and metric tonnes, often with a 1 m³ minimum.
- Sea FCL: charged per container, so the question is how many containers you need and whether the payload is within limits.
Tips for planning a container load
- Leave some space. Cartons seldom fill a container exactly, and you need room to lash and to unload safely.
- Heavy, dense cargo usually hits the payload limit before the space is full; road weight limits from Colombo port can be lower still.
- Keep weight evenly spread along the floor, with the heaviest pieces at the bottom.
- Mark fragile or top-load-only cargo as not stackable, and upright cargo as “this side up”.
- Wooden pallets and crates need ISPM 15 treatment for most export markets; see fumigation and inspection providers.
Frequently asked questions
How do I calculate CBM?
Multiply length × width × height in metres, then by the number of pieces. In centimetres, multiply the three sides and divide by 1,000,000. A 60 × 40 × 40 cm carton is 0.096 m³, so 200 cartons are 19.2 m³.
How many CBM fit in a 20ft or 40ft container?
A 20ft container holds about 33 m³ and a 40ft high cube about 76 m³ of space, but boxes rarely fill it perfectly. In practice plan on roughly 25–28 m³ for a 20ft, 55–60 m³ for a 40ft and 65–68 m³ for a 40ft high cube, depending on carton sizes.
What is chargeable weight in air freight?
Airlines charge the greater of the actual gross weight and the volumetric weight. Volumetric weight is the volume in cubic centimetres divided by 6,000 (1 m³ = 167 kg). Courier and express services usually divide by 5,000.
What does W/M mean for LCL sea freight?
Weight or measure: LCL is charged per revenue ton, which is the greater of the volume in cubic metres and the weight in metric tonnes. 3 m³ weighing 800 kg is billed as 3 RT; 2 m³ weighing 2,500 kg is billed as 2.5 RT.
Is LCL or FCL cheaper?
As a rule of thumb, LCL (sharing a container) is cheaper below about 13–15 m³. Between roughly 13 and 18 m³ a full 20ft container is often cheaper, and above that a full container almost always is. Rates change, so ask forwarders for both prices.
How are drums, rolls and bags measured?
Carriers charge for the space around round cargo, so a drum is measured as diameter × diameter × height. Bags and sacks are measured at their filled size. The calculator does this for you when you choose 'Drum / roll'.
Is the load plan exact?
No. It is a planning estimate that respects container size, payload, 'this side up' and non-stackable cargo. Real loading also depends on packaging strength, lashing, forklift access and the shipping line's rules, so confirm with your forwarder.
