Section V: Mineral products
Chapter 27: Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
16 headings. Open one to see every Sri Lankan tariff line under it with the duty, taxes and requirements. Search all codes
- 27.01Coal; briquettes, ovoids and similar solid fuels manufactured from coal4 lines
- 27.02Lignite, whether or not agglomerated, excluding jet2 lines
- 27.03Peat (including peat litter), whether or not agglomerated1 line
- 27.04Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon1 line
- 27.05Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons1 line
- 27.06Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars1 line
- 27.07Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents7 lines
- 27.08Pitch and pitch coke, obtained from coal tar or from other mineral tars2 lines
- 27.09Petroleum oils and oils obtained from bituminous minerals, crude2 lines
- 27.10Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70% or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils21 lines
- 27.11Petroleum gases and other gaseous hydrocarbons8 lines
- 27.12Petroleum jelly; paraffin wax, micro- crystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured3 lines
- 27.13Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals4 lines
- 27.14Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks2 lines
- 27.15Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)1 line
- 27.16Electrical energy. (optional heading)1 line
Chapter notes (legal text)
The notes decide what belongs in this chapter and what does not. Read them when two codes seem to fit.
Notes.
1.- This Chapter does not cover :
(a) Separate chemically defined organic compounds, other than pure methane and propane which are to be classified in heading 27.11;
(b) Medicaments of heading 30.03 or 30.04; or
(c) Mixed unsaturated hydrocarbons of heading 33.01, 33.02 or 38.05.
2.- References in heading 27.10 to “petroleum oils and oils obtained from bituminous minerals” include not only petroleum oils and oils obtained from bituminous minerals but also similar oils, as well as those consisting
mainly of mixed unsaturated hydrocarbons, obtained by any process, provided that the weight of the non-aromatic constituents exceeds that of the aromatic constituents.
However, the references do not include liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1,013 millibars when a reduced-pressure distillation method is used (Chapter
39).
3.- For the purposes of heading 27.10, “waste oils” means waste containing mainly petroleum oils and oils obtained from bituminous minerals (as described in Note 2 to this
Chapter), whether or not mixed with water. These include:
(a) Such oils no longer fit for use as primary products (for example, used lubricating oils, used hydraulic oils and used transformer oils);
(b) Sludge oils from the storage tanks of petroleum oils, mainly containing such oils and a high concentration of additives (for example, chemicals) used in the manufacture of the primary products; and
(c) Such oils in the form of emulsions in water or mixtures with water, such as those resulting from oil spills, storage tank washings, or from the use of cutting oils for machining operations.
Subheading Notes.
1.- For the purposes of subheading 2701.11, “anthracite” means coal having a volatile matter limit (on a dry, mineral-matter-free basis) not exceeding 14%.
2.- For the purposes of subheading 2701.12, “bituminous coal” means coal having a volatile matter limit (on a dry, mineral-matter-free basis) exceeding 14 % and a calorific value limit (on a moist, mineral-matterfree basis)
equal to or greater than 5,833 kcal/kg.
3.- For the purposes of subheadings 2707.10, 2707.20, 2707.30 and 2707.40 the terms “benzol (benzene)”, “toluol (toluene)”, “xylol (xylenes)” and “naphthalene” apply to products which contain more than 50 % by weight
of benzene, toluene, xylenes or naphthalene, respectively.
4.- For the purposes of subheading 2710.12, “light oils and preparations” are those of which 90 % or more by volume (including losses) distil at 210 °C according to the ISO 3405 method (equivalent to the ASTM D 86
method).
Section V - Chapter 27 - Page 1
