Section XV: Base metals and articles of base metal
Chapter 74: Copper and articles thereof
16 headings. Open one to see every Sri Lankan tariff line under it with the duty, taxes and requirements. Search all codes
- 74.01Copper mattes; cement copper (precipitated copper)1 line
- 74.02Unrefined copper; copper anodes for electropytic refining1 line
- 74.03Refined copper and copper alloys, unwrought7 lines
- 74.04Copper waste and scrap1 line
- 74.05Master alloys of copper1 line
- 74.06Copper powders and flakes2 lines
- 74.07Copper bars, rods and profiles3 lines
- 74.08Copper wire5 lines
- 74.09Copper plates, sheets and strip, of a thickness exceeding 0.15 mm8 lines
- 74.10Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm4 lines
- 74.11Copper tubes and pipes4 lines
- 74.12Copper tube or pipe fittings (for example, couplings, elbows, sleeves)2 lines
- 74.13Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated1 line
74.14 Deleted heading
- 74.15Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper6 lines
74.16 Deleted heading
74.17 Deleted heading
- 74.18Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper4 lines
- 74.19Other articles of copper6 lines
Chapter notes (legal text)
The notes decide what belongs in this chapter and what does not. Read them when two codes seem to fit.
Note.
1.- In this Chapter the following expressions have the meanings hereby assigned to them :
(a) Refined copper
Metal containing at least 99.85 % by weight of copper; or
Metal containing at least 97.5 % by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table :
TTAABBLLEE --OOtthheerr eelleemmeennttss
Limiting
Element content %
bu weight
Ag-Silver 0.25
As-Arsenic 0.5
Cd- Cadmium 1.3
Cr-Chromium 1.4
Mg-Magnesium 0.8
Pb-Lead 1.5
S-Sulphur 0.7
Sn-Tin 0.8
Te-Tellurium 0.8
Zn-Zinc 1
Zr-Zirconium 0.3
Other elements*, each 0.3
* Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.
(b) Copper alloys
Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that :
(i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
(ii) the total content by weight of such other elements exceeds 2.5 %.
(c) Master alloys
Alloys containing with other elements more than 10 % by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, desulphurising agents or
for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 % by weight of phosphorus falls in heading 28.53.
Subheading Note.
1. In this Chapter the following expressions have the meanings hereby assigned to them :
(a) Copper-zinc base alloys (brasses)
Alloys of copper and zinc, with or without other elements. When other elements are present :
- zinc predominates by weight over each of such other elements;
- any nickel content by weight is less than 5 % (see copper-nickel-zinc alloys (nickel silvers)); and
- any tin content by weight is less than 3 % (see copper-tin alloys (bronzes)).
(b) Copper-tin base alloys (bronzes)
Section XV - Chapter 74 - Page 1
(b) Copper-tin base alloys (bronzes)
Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3 % or more the
zinc content by weight may exceed that of tin but must be less than 10 %.
(c) Copper-nickel-zinc base alloys (nickel silvers)
Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5 % or more by weight (see copper-zinc alloys (brasses)).
(d) Copper-nickel base alloys
Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1 % of zinc. When other elements are present, nickel predominates by weight over each of such
other elements.
